Arnite® A06 300
聚对苯二甲酸乙二酯
产品说明:
Very High Viscosity, Transparent, Extrusion
Special Features:
Arnite® (PBT, PET and blends) are high-performance engineering plastics that combine high strength and rigidity with excellent processing characteristics. As a result, Arnite® A (PET) and Arnite® T (PBT) are well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
A wide portfolio of Arnite® is available including unreinforced, reinforced and flame retardant grades.
密度 | 1.40 | g/cm³ | ISO 1183 |
吸水率 |
|
| ISO 62 |
饱和, 73°F | 0.75 | % |
|
平衡, 73°F, 50% RH | 0.30 | % |
|
熔融温度 2 | 491 | °F | ISO 11357-3 |
线形热膨胀系数 |
|
| ISO 11359-2 |
流动 | 4.4E-5 | in/in/°F |
|
横向 | 4.4E-5 | in/in/°F |
|
体积电阻率 | > 1.0E+15 | ohms·cm | IEC 60093 |
熔体导热性 | 1.7 | Btu·in/hr/ft²/°F |
|
Specific Heat Capacity of Melt | 0.490 | Btu/lb/°F |
|
RSV - m-cresol, 1g/100ml | 2.04 |
| 内部方法 |
干燥温度 | 212 到 248 | °F |
|
干燥时间 | 3.0 到 12 | hr |
|
料筒后部温度 | 518 到 536 | °F |
|
料筒中部温度 | 518 到 554 | °F |
|
料筒前部温度 | 518 到 554 | °F |
|
射嘴温度 | 518 到 554 | °F |
|
加工（熔体）温度 | 518 到 554 | °F |
|
模具温度 | 266 到 284 | °F |
|
注射速度 | 中等偏快 |
|
|
背压 | 435 到 1450 | psi |
|
螺杆压缩比 | 2.5:1.0 |
|
|
如需恩骅力（Envalior）原厂物性表及相关文件，请联系我司工作人员，谢谢！
