CYCOLOY™ FR Resin C2950
聚碳酸酯+丙烯腈丁二烯苯乙烯
产品说明:
CYCOLOY C2950 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) resin is a standard high heat grade that can be injection molded. This non-chlorinated, non-brominated flame retardant high heat PC/ABS has a UL V0 & 5VB flame rating. CYCOLOY C2950 resin is an excellent candidate for a wide variety of applications including appliances, lighting and electrical.
添加剂 | |
特性 | |
用途 | |
加工方法 | |
多点数据 | Coefficient of Thermal Expansion vs. Temperature (ASTM E831) Elastic Modulus vs Temperature (ASTM D4065) Flexural DMA (ASTM D4065) Instrumented Impact (Energy) (ASTM D3763) Instrumented Impact (Load) (ASTM D3763) Pressure-Volume-Temperature (PVT - Zoller Method) Shear DMA (ASTM D4065) Specific Heat vs. Temperature (ASTM D3417) Tensile Creep (ASTM D2990) Tensile Fatigue Tensile Stress vs. Strain (ASTM D638) Thermal Conductivity vs. Temperature (ASTM E1530) Viscosity vs. Shear Rate (ASTM D3835)
|
Also Available In | |
密度 / 比重 |
|
| ASTM D792 |
-- | 1.18 |
|
|
-- 3 | 1.22 |
|
|
熔流率（熔体流动速率） (260°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
收缩率 |
|
| 内部方法 |
流动 : 0.126 in | 4.0E-3 到 6.0E-3 | in/in |
|
横向流动 : 0.126 in | 4.0E-3 到 6.0E-3 | in/in |
|
吸水率 |
|
| ASTM D570 |
24 hr | 0.10 | % |
|
平衡, 73°F | 0.40 | % |
|
洛氏硬度 (R 级) | 123 |
| ASTM D785 |
抗张强度 4 (屈服) | 8990 | psi | ASTM D638 |
伸长率 4 (断裂) | 40 | % | ASTM D638 |
弯曲模量 5 (3.94 in 跨距) | 384000 | psi | ASTM D790 |
弯曲强度 5 (屈服, 3.94 in 跨距) | 14800 | psi | ASTM D790 |
悬壁梁缺口冲击强度 |
|
| ASTM D256 |
-22°F | 3.0 | ft·lb/in |
|
73°F | 10 | ft·lb/in |
|
装有测量仪表的落镖冲击 |
|
| ASTM D3763 |
-22°F, Total Energy | 478 | in·lb |
|
73°F, Total Energy | 540 | in·lb |
|
载荷下热变形温度 |
|
| ASTM D648 |
66 psi, 未退火, 0.252 in | 219 | °F |
|
264 psi, 未退火, 0.126 in | 194 | °F |
|
264 psi, 未退火, 0.252 in | 203 | °F |
|
维卡软化温度 | 234 | °F | ASTM D1525 6 |
线形热膨胀系数 |
|
| ASTM D696 |
流动 : -22 到 86°F | 4.0E-5 | in/in/°F |
|
横向 : -22 到 86°F | 4.0E-5 | in/in/°F |
|
导热系数 | 1.4 | Btu·in/hr/ft²/°F | ASTM C177 |
RTI Elec | 185 | °F | UL 746 |
RTI Imp | 185 | °F | UL 746 |
RTI | 185 | °F | UL 746 |
表面电阻率 | > 1.0E+16 | ohms | ASTM D257 |
体积电阻率 | 1.0E+17 | ohms·cm | ASTM D257 |
介电强度 (0.126 in, in Oil) | 490 | V/mil | ASTM D149 |
介电常数 |
|
| ASTM D150 |
60 Hz | 3.00 |
|
|
100 Hz | 3.00 |
|
|
50 kHz | 3.00 |
|
|
耗散因数 |
|
| ASTM D150 |
50 Hz | 5.0E-3 |
|
|
60 Hz | 5.0E-3 |
|
|
100 Hz | 4.9E-3 |
|
|
耐电弧性 7 | PLC 6 |
| ASTM D495 |
相比耐漏电起痕指数(CTI) | PLC 1 |
| UL 746 |
高电弧燃烧指数(HAI) 8 | PLC 0 |
| UL 746 |
高电压电弧起痕速率 (HVTR) | PLC 2 |
| UL 746 |
热丝引燃 (HWI) | PLC 1 |
| UL 746 |
UL 阻燃等级 |
|
| UL 94 |
0.06 in | V-0 |
|
|
0.10 in | 5VB |
|
|
极限氧指数 | 32 | % | ASTM D2863 |
干燥温度 | 176 到 194 | °F |
|
干燥时间 | 3.0 到 4.0 | hr |
|
建议的最大水分含量 | 0.040 | % |
|
建议注射量 | 30 到 80 | % |
|
料筒后部温度 | 428 到 491 | °F |
|
料筒中部温度 | 428 到 527 | °F |
|
料筒前部温度 | 473 到 527 | °F |
|
射嘴温度 | 473 到 527 | °F |
|
加工（熔体）温度 | 473 到 527 | °F |
|
模具温度 | 140 到 176 | °F |
|
背压 | 43.5 到 102 | psi |
|
螺杆转速 | 40 到 70 | rpm |
|
排气孔深度 | 1.5E-3 到 3.0E-3 | in |
|
Injection Molding Parameters |
如需沙伯基础（SABIC）原厂物性表及相关文件，请联系我们工作人员，谢谢！
