Stanyl® TS250FK33
聚酰胺 46
产品说明:
30% Glass/Mineral Reinforced, Flame Retardant, Low Warpage
Special Features:
Stanyl® is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.
填料/增强材料 | |
添加剂 | |
特性 | |
加工方法 | |
树脂ID (ISO 1043) | |
密度 | 1.66 | g/cm³ | ISO 1183 |
收缩率 |
|
| ISO 294-4 |
横向流量 | 1.7 | % |
|
流量 | 0.80 | % |
|
吸水率 |
|
| ISO 62 |
饱和, 73°F | 5.8 | % |
|
平衡, 73°F, 50% RH | 1.6 | % |
|
拉伸模量 | 1.16E+6 | psi | ISO 527-2 |
拉伸应力 (断裂) | 17400 | psi | ISO 527-2 |
拉伸应变 (断裂) | 2.0 | % | ISO 527-2 |
弯曲模量 | 1.10E+6 | psi | ISO 178 |
简支梁缺口冲击强度 (73°F) | 1.9 | ft·lb/in² | ISO 179/1eA |
热变形温度 (264 psi, 未退火) | 536 | °F | ISO 75-2/A |
玻璃转化温度 3 | 167 | °F | ISO 11357-2 |
熔融温度 3 | 563 | °F | ISO 11357-3 |
线形热膨胀系数 |
|
| ISO 11359-2 |
流动 | 1.1E-5 | in/in/°F |
|
横向 | 3.1E-5 | in/in/°F |
|
体积电阻率 | > 1.0E+15 | ohms·cm | IEC 60093 |
介电强度 | 760 | V/mil | IEC 60243-1 |
相对电容率 (1 MHz) | 4.00 |
| IEC 60250 |
耗散因数 (1 MHz) | 0.016 |
| IEC 60250 |
可燃性等级 (0.030 in) | V-0 |
| IEC 60695-11-10, -20 |
干燥温度 | 176 | °F |
干燥时间 | 4.0 到 8.0 | hr |
料筒后部温度 | 536 到 608 | °F |
料筒中部温度 | 572 到 608 | °F |
料筒前部温度 | 572 到 608 | °F |
射嘴温度 | 572 到 608 | °F |
加工（熔体）温度 | 581 到 608 | °F |
模具温度 | 176 到 248 | °F |
注射速度 | 中等偏快 |
|
背压 | 290 到 1450 | psi |
螺杆压缩比 | 2.5:1.0 |
|
如需恩骅力（Envalior）原厂物性表及相关文件，请联系我司工作人员，谢谢！
