Products

Zytel® 73G15L NC010

Zytel® 73G15L NC010

Manufacturer: DUPONT
Produced At: Import/ China
Product Category: NYLON 6/PA6
Product No: Zytel 73G15L NC010
Product Quantity: 25KG / BAG

Zytel® 73G15L NC010

NYLON RESIN
Product Description:
15% Glass Reinforced Polyamide 6
Filler / Reinforcement 

  • Glass Fiber, 15% Filler by Weight

Additive 
  • Lubricant，Mold Release 
RoHS Compliance 

  • Contact Manufacturer

Forms 

  • Pellets

Processing Method 

  • Injection Molding

Multi-Point Data 

  • Isothermal Stress vs. Strain (ISO 11403-1)

  • Secant Modulus vs. Strain (ISO 11403-1)

  • Shear Modulus vs. Temperature (ISO 11403-1)

  • Shear Modulus vs. Temperature, Dynamic (ISO 11403-1)

  • Tensile Modulus vs. Temperature (ISO 11403-1)

Part Marking Code (ISO 11469)

  • PA6-GF15

Resin ID (ISO 1043)

  • PA6-GF15

Physical
Dry
Conditioned
Unit
Test Method
Density
1.23
--
g/cm³
ISO 1183
Molding Shrinkage



ISO 294-4
Across Flow
0.80
--
%

Flow
0.30
--
%

Water Absorption



ISO 62
Saturation, 73°F, 0.0787 in
7.6
--
%

Equilibrium, 73°F, 0.0787 in, 50% RH
2.5
--
%

Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
870000
508000
psi
ISO 527-2
Tensile Stress (Break)
19600
10400
psi
ISO 527-2
Tensile Strain (Break)
4.0
10
%
ISO 527-2
Flexural Modulus
725000
--
psi
ISO 178
Poisson's Ratio
0.35
0.37

ISO 527
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength



ISO 179/1eA
-40°F
2.9
--
ft·lb/in²

-22°F
2.9
6.7
ft·lb/in²

73°F
3.3
7.1
ft·lb/in²

Charpy Unnotched Impact Strength



ISO 179/1eU
-22°F
21
26
ft·lb/in²

73°F
24
45
ft·lb/in²

Notched Izod Impact Strength



ISO 180/1A
-40°F
2.4
--
ft·lb/in²

-22°F
2.4
--
ft·lb/in²

73°F
2.9
5.7
ft·lb/in²

Unnotched Izod Impact Strength



ISO 180/1U
-40°F
19
--
ft·lb/in²

73°F
21
--
ft·lb/in²

Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature




66 psi, Unannealed
428
--
°F
ISO 75-2/B
264 psi, Unannealed
392
--
°F
ISO 75-2/A
Vicat Softening Temperature
419
--
°F
ISO 306/B50
Melting Temperature 3
430
--
°F
ISO 11357-3
CLTE



ISO 11359-2
Flow
2.1E-5
--
in/in/°F

Transverse
6.1E-5
--
in/in/°F

Flammability
Dry
Conditioned
Unit
Test Method
Burning Rate 4 (0.0394 in)
0.98
--
in/min
ISO 3795
Flame Rating (0.06 in)

  • HB

  • HB

--

UL 94, IEC 60695-11-10, -20
Oxygen Index
21
--
%
ISO 4589-2
FMVSS Flammability
B
--

FMVSS 302
Fogging - G-value (condensate)
0.0
--
g
ISO 6452
Fill Analysis
Dry
Conditioned
Unit
Test Method
Melt Density
1.07
--
g/cm³

Specific Heat Capacity of Melt
0.590
--
Btu/lb/°F

Thermal Conductivity of Melt
1.3
--
Btu·in/hr/ft²/°F

Additional Information
Dry
Conditioned
Unit
Test Method
Odor 5
4.00
--

VDA 270
Injection
Dry
Unit

Drying Temperature
176
°F

Drying Time - Desiccant Dryer
2.0 to 4.0
hr

Suggested Max Moisture
0.20
%

Processing (Melt) Temp
500 to 536
°F

Melt Temperature, Optimum
518
°F

Mold Temperature
158 to 248
°F

Mold Temperature, Optimum
212
°F

Holding Pressure
7250 to 14500
psi

Drying Recommended
yes


Hold Pressure Time
3.00
s/mm

Maximum Screw Tangential Speed
472
in/min


Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields


Consultation

Shanghai Langqi Plastic Materials Co., Ltd.   沪ICP备12022668号 公安机关备案号：31011202003696

展开