ACRYLITE® Hi-Gloss FT15
Polymethyl Methacrylate Acrylic
ACRYLITE® Hi-Gloss FT15 polymer is an amorphous thermoplastic molding and extrusion compound based on polymethyl methacrylate (PMMA). ACRYLITE® Hi-Gloss FT15 polymer is available in a range of opaque colors including deep jet black.
Typical properties of ACRYLITE® Hi-Gloss acrylic polymers are:
The special properties of ACRYLITE® Hi-Gloss FT15 polymer are:
Application:
Used for injection molding and extrusion applications.
Features | - Amorphous，Good Colorability，High Clarity，High Hardness，High Heat Resistance，High Light Transmission，High Scratch Resistance，High Strength，Medium Flow，Weather Resistant
|
Uses | - Automotive Applications，Automotive Exterior Trim，Lighting Fixtures
|
Agency Ratings | |
Appearance | - Black，Clear/Transparent，Colors Available，Opaque
|
Forms | |
Processing Method | - Extrusion，Injection Molding
|
Density | 1.19 | g/cm³ | ISO 1183 |
Melt Volume-Flow Rate (MVR) (230°C/3.8 kg) | 0.275 | in³/10min | ISO 1133 |
Tensile Modulus | 508000 | psi | ISO 527-2/1 |
Tensile Stress (Break) | 7250 | psi | ISO 527-2/5 |
Tensile Strain (Break) | 3.1 | % | ISO 527-2/5 |
Charpy Unnotched Impact Strength (73°F) | 8.6 | ft·lb/in² | ISO 179/1eU |
Heat Deflection Temperature |
|
|
|
66 psi, Unannealed | 225 | °F | ISO 75-2/B |
264 psi, Unannealed | 221 | °F | ISO 75-2/A |
Glass Transition Temperature | 250 | °F | IEC 10006 |
Vicat Softening Temperature | 239 | °F | ISO 306/B50 |
Glow Wire Ignition Temperature | 1250 | °F | IEC 60695-2-13 |
Fire Rating | B2 |
| DIN 4102 |
