Shanghai Langqi Plastic Materials Co., Ltd.

Zytel® FR50 NC010A

Manufacturer: Celanese
Produced At: Import/ China
Product Category: PA66
Product No: Zytel FR50 NC010A
Product Quantity: 25KG / BAG
Product Features: Flame Retardant

Product information

Zytel® FR50 NC010A

NYLON RESIN

Product Description:

25% Glass Reinforced, Flame Retardant, Polyamide 66

Filler / Reinforcement	Glass Fiber, 25% Filler by Weight
Additive	Flame Retardant,Mold Release
Features	Flame Retardant
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Stress vs. Shear Rate (ISO 11403-1) Specific Volume vs Temperature (ISO 11403-2) Viscosity vs. Shear Rate (ISO 11403-2)
Part Marking Code (ISO 11469)	PA66-GF25FR(17)
Resin ID (ISO 1043)	PA66-GF25FR(17)

Physical	Dry	Conditioned	Unit	Test Method
Density	1.60	--	g/cm³	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	0.80	--	%
Flow	0.30	--	%
Water Absorption (Equilibrium, 73°F, 0.0787 in, 50% RH)	0.70	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	1.54E+6	1.09E+6	psi	ISO 527-2
Tensile Stress (Break)	24700	--	psi	ISO 527-2
Tensile Strain (Break)	2.5	--	%	ISO 527-2
Flexural Modulus	1.37E+6	--	psi	ISO 178
Poisson's Ratio	0.34	0.34		ISO 527
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-40°F	5.1	--	ft·lb/in²
73°F	5.4	--	ft·lb/in²
Charpy Unnotched Impact Strength(73°F)	19	--	ft·lb/in²	ISO 179/1eU

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	493	--	°F	ISO 75-2/B
264 psi, Unannealed	475	--	°F	ISO 75-2/A
Glass Transition Temperature 3	176	--	°F	ISO 11357-2
Melting Temperature 4	502	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow	1.1E-5	--	in/in/°F
Transverse	5.6E-5	--	in/in/°F

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity	> 1.0E+15	--	ohms·cm	IEC 60093
Electric Strength	970	--	V/mil	IEC 60243-1
Dissipation Factor				IEC 60250
100 Hz	0.018	--
1 MHz	0.018	--
Comparative Tracking Index (CTI)	PLC 2	--		UL 746
Comparative Tracking Index	275	--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Burning Rate 5 (0.0394 in)	< 3.9	--	in/min	ISO 3795
Flame Rating				UL 94, IEC 60695-11-10, -20
0.030 in	V-0	--
0.06 in	V-0 5VA	--
Oxygen Index	35	--	%	ISO 4589-2
FMVSS Flammability	B	--		FMVSS 302

Fill Analysis	Dry	Conditioned	Unit	Test Method
Melt Density	1.40	--	g/cm³
Ejection Temperature	410	--	°F
Specific Heat Capacity of Melt	0.397	--	Btu/lb/°F
Thermal Conductivity of Melt	1.5	--	Btu·in/hr/ft²/°F
Additional Information	Dry	Conditioned	Unit	Test Method
Emission of Organic Compounds	4.70	--	µgC/g	VDA 277
Odor	4.50	--		VDA 270

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time - Desiccant Dryer	2.0 to 4.0	hr
Suggested Max Moisture	0.20	%
Processing (Melt) Temp	536 to 572	°F
Melt Temperature, Optimum	554	°F
Mold Temperature	122 to 194	°F
Mold Temperature, Optimum	212	°F
Holding Pressure	7250 to 14500	psi
Drying Recommended	yes
Hold Pressure Time	3.00	s/mm
Maximum Screw Tangential Speed	472	in/min

Products

Products

Zytel® FR50 NC010A

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service