Products

PELPRENE™ P46D-01

PELPRENE™ P46D-01

Manufacturer: TOYOBO
Produced At: Japan / China
Product Category: TPEE
Product No: PELPRENE P46D-01
Product Quantity: 25KG / BAG
Product Features: Flame Rated/ High Viscosity/Wear Resistan

PELPRENE™ P46D-01

Thermoplastic Polyester Elastomer
TOYOBO America, Inc.
Product Description:
PELPRENE™ P46D-01 is a Thermoplastic Polyester Elastomer (TPEE) product.

Characteristics include:

  • Flame Rated

  • High Viscosity

  • Wear Resistant

Forms 

  • Pellets

Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
1.15

ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
0.50
g/10 min
ASTM D1238
Molding Shrinkage - Flow (0.0787 in)
7.0E-3
in/in
ASTM D955
Water Absorption (Equilibrium, 73°F, 65% RH)
0.45
%
ASTM D570
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
46

ASTM D2240
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
4630
psi
ASTM D638
Tensile Elongation (Break)
700
%
ASTM D638
Flexural Modulus
16000
psi
ASTM D790
Compressive Modulus
1390
psi
ASTM D695
Taber Abrasion Resistance (1000 Cycles)
10.0
mg
ASTM D1044
Elastomers
Nominal Value
Unit
Test Method
Tear Strength
942
lbf/in
ASTM D624
Compression Set
55
%
ASTM D395
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
No Break

ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
165
°F
ASTM D648
Brittleness Temperature
-85.0
°F
ASTM D746
Vicat Softening Temperature
307
°F
ASTM D1525
Melting Temperature
397
°F
DSC
CLTE - Flow
9.4E-5
in/in/°F
ASTM D696
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
4.0E+13
ohms·cm
ASTM D257
Flammability
Nominal Value
Unit
Test Method
Flame Rating
HB

UL 94
Additional Information
Hardness, JIS K6301, A scale: 97
Resilience, JIS K6301: 70 %
Dielectric Strength, JIS K2111: 25 MV/m
The value listed as Compression Set, ASTM D395 was tested according to the JIS K6301 standard.
The value listed as Brittle Point, ASTM D746 was tested according to the JIS K6301 standard.
Coefficient of Linear Thermal Expansion, TMA: 17e-5 1/K
Compression Modulus, ASTM D695, 10%: 9.6 MPa
Tensile Modulus, ASTM D638, 50% Modulus: 15.2 MPa
The value listed as Brittle Temp ASTM D746, was tested in accordance with JIS K6301.


Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields


Consultation

Shanghai Langqi Plastic Materials Co., Ltd.   沪ICP备12022668号 公安机关备案号：31011202003696

展开