Products

Akulon® S223-E

Akulon® S223-E

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Nylon 66（PA66）
Product No: Akulon S223-E 
Product Quantity: 25KG / BAG
Product Features: Low Viscosity,Lubricated,Medium Viscosity

Akulon® S223-E

Polyamide 66

Product Description:
Low/Medium Viscosity

Special Features:

  • Low viscosity

  • Lubricated

  • Medium viscosity


Used In:

  • Terminal Blocks


Akulon® is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon® grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon® sets the market standards.
Additive 

  • Lubricant

Features 

  • Low Viscosity，Lubricated，Medium Viscosity

Uses 

  • Electrical/Electronic Applications

Processing Method 

  • Injection Molding

Multi-Point Data 

  • Isochronous Stress vs. Strain (ISO 11403-1)

  • Isothermal Stress vs. Strain (ISO 11403-1)

  • Secant Modulus vs. Strain (ISO 11403-1)

  • Shear Modulus vs. Temperature (ISO 11403-1)

  • Specific Heat vs. Temperature (ISO 11403-2)

  • Specific Volume vs Temperature (ISO 11403-2)

  • Viscosity vs. Shear Rate (ISO 11403-2)

Resin ID (ISO 1043)

  • PA66

Physical
Dry
Conditioned
Unit
Test Method
Density
1.14
--
g/cm³
ISO 1183
Molding Shrinkage



ISO 294-4
Across Flow
1.6
--
%

Flow
1.6
--
%

Water Absorption



ISO 62
Saturation, 73°F
8.5
--
%

Equilibrium, 73°F, 50% RH
2.3
--
%

Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
508000
218000
psi
ISO 527-2
Tensile Stress (Yield)
13800
8700
psi
ISO 527-2
Tensile Strain (Yield)
3.5
20
%
ISO 527-2
Nominal Tensile Strain at Break
25
> 50
%
ISO 527-2
Flexural Modulus
406000
--
psi
ISO 178
Flexural Stress
18100
--
psi
ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength



ISO 179/1eA
-22°F
2.9
2.9
ft·lb/in²

73°F
2.9
5.7
ft·lb/in²

Charpy Unnotched Impact Strength



ISO 179/1eU
-22°F
No Break
No Break


73°F
No Break
No Break


Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature




66 psi, Unannealed
437
--
°F
ISO 75-2/B
264 psi, Unannealed
176
--
°F
ISO 75-2/A
Melting Temperature 3
500
--
°F
ISO 11357-3
CLTE



ISO 11359-2
Flow
5.6E-5
--
in/in/°F

Transverse
5.6E-5
--
in/in/°F

Effective Thermal Diffusivity
4.87E-8
--
m²/s

Electrical
Dry
Conditioned
Unit
Test Method
Volume Resistivity
1.0E+15
1.0E+12
ohms·cm
IEC 60093
Electric Strength
640
510
V/mil
IEC 60243-1
Relative Permittivity



IEC 60250
100 Hz
3.20
10.0


1 MHz
3.00
4.00


Dissipation Factor



IEC 60250
100 Hz
6.0E-3
0.14


1 MHz
0.017
0.10


Comparative Tracking Index
600
600
V
IEC 60112
Flammability
Dry
Conditioned
Unit
Test Method
Flammability Classification



IEC 60695-11-10, -20
0.06 in
V-2
--


0.12 in
V-2
--


Fill Analysis
Dry
Conditioned
Unit

Melt Density
0.969
--
g/cm³

Melt Thermal Conductivity
0.90
--
Btu·in/hr/ft²/°F

Specific Heat Capacity of Melt
0.657
--
Btu/lb/°F

Injection
Dry
Unit

Drying Temperature
176
°F

Drying Time
4.0 to 8.0
hr

Rear Temperature
509 to 545
°F

Middle Temperature
527 to 554
°F

Front Temperature
536 to 563
°F

Nozzle Temperature
536 to 554
°F

Processing (Melt) Temp
518 to 563
°F

Mold Temperature
122 to 176
°F

Injection Rate
Moderate-Fast


Back Pressure
435 to 1450
psi

Screw Compression Ratio
2.5:1.0



Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields


Consultation

Shanghai Langqi Plastic Materials Co., Ltd.   沪ICP备12022668号 公安机关备案号：31011202003696

展开