Products

Arnite® T06 202

Arnite® T06 202

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polybutylene Terephthalate（PBT）
Product No: Arnite® T06 202   
Product Quantity: 25KG / BAG
Product Features: Medium Viscosity

Arnite® T06 202

Polybutylene Terephthalate

Product Description:
Medium Viscosity, Injection Molding

Special Features:

  • Contains release agent

  • Medium viscosity


Used In:

  • Automotive Connectors

  • Automotive Connectors (3)


Arnite® (PBT, PET and blends) are high-performance engineering plastics that combine high strength and rigidity with excellent processing characteristics. As a result, Arnite® A (PET) and Arnite® T (PBT) are well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
A wide portfolio of Arnite® is available including unreinforced, reinforced and flame retardant grades.
Additive 

  • Mold Release

Features 

  • Medium Viscosity

Uses 

  • Automotive Applications，Connectors 

Processing Method 

  • Injection Molding

Multi-Point Data 

  • Specific Heat vs. Temperature (ISO 11403-2)

  • Specific Volume vs Temperature (ISO 11403-2)

  • Viscosity vs. Shear Rate (ISO 11403-2)

Resin ID (ISO 1043)

  • PBT

Physical
Nominal Value
Unit
Test Method
Density
1.30
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (250°C/2.16 kg)
1.46
in³/10min
ISO 1133
Molding Shrinkage


ISO 294-4
Across Flow
2.0
%

Flow
2.0
%

Water Absorption


ISO 62
Saturation, 73°F
0.45
%

Equilibrium, 73°F, 50% RH
0.18
%

Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
377000
psi
ISO 527-2
Tensile Stress (Yield)
7980
psi
ISO 527-2
Tensile Strain (Yield)
3.5
%
ISO 527-2
Nominal Tensile Strain at Break
> 50
%
ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength


ISO 179/1eA
-22°F
1.9
ft·lb/in²

73°F
2.0
ft·lb/in²

Charpy Unnotched Impact Strength


ISO 179/1eU
-22°F
No Break


73°F
No Break


Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature



66 psi, Unannealed
329
°F
ISO 75-2/B
264 psi, Unannealed
131
°F
ISO 75-2/A
Melting Temperature 3
437
°F
ISO 11357-3
CLTE


ISO 11359-2
Flow
5.0E-5
in/in/°F

Transverse
5.0E-5
in/in/°F

Effective Thermal Diffusivity
4.65E-8
m²/s

Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
> 1.0E+15
ohms·cm
IEC 60093
Electric Strength
690
V/mil
IEC 60243-1
Relative Permittivity


IEC 60250
100 Hz
3.50


1 MHz
3.20


Dissipation Factor


IEC 60250
100 Hz
2.0E-3


1 MHz
0.020


Comparative Tracking Index
600
V
IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flammability Classification


IEC 60695-11-10, -20
0.030 in
HB


0.06 in
HB


Glow Wire Flammability Index


IEC 60695-2-12
0.06 in
1560
°F

0.12 in
1560
°F

Fill Analysis
Nominal Value
Unit

Melt Density
1.04
g/cm³

Melt Thermal Conductivity
0.76
Btu·in/hr/ft²/°F

Specific Heat Capacity of Melt
0.540
Btu/lb/°F

Injection
Nominal Value
Unit

Drying Temperature
212 to 248
°F

Drying Time
3.0 to 12
hr

Rear Temperature
446 to 464
°F

Middle Temperature
446 to 482
°F

Front Temperature
464 to 500
°F

Nozzle Temperature
464 to 500
°F

Processing (Melt) Temp
464 to 518
°F

Mold Temperature
140 to 212
°F

Injection Rate
Moderate-Fast


Back Pressure
435 to 1450
psi

Screw Compression Ratio
2.5:1.0



Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields


Consultation

Shanghai Langqi Plastic Materials Co., Ltd.   沪ICP备12022668号 公安机关备案号：31011202003696

展开