Products

Arnite® A06 700

Arnite® A06 700

Manufacturer: DSM
Produced At: Europe / China
Product Category: Polyethylene Terephthalate（PET）
Product No: Arnite A06 700   
Product Quantity: 25KG / BAG
Product Features: High Viscosity

Arnite® A06 700

Polyethylene Terephthalate
Product Description:
Very High Viscosity, Improved Impact, Extrusion

Special Features:

  • High viscosity


Arnite® (PBT, PET and blends) are high-performance engineering plastics that combine high strength and rigidity with excellent processing characteristics. As a result, Arnite® A (PET) and Arnite® T (PBT) are well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
A wide portfolio of Arnite® is available including unreinforced, reinforced and flame retardant grades.
Features 

  • High Viscosity

Processing Method 
  • Extrusion，Injection Molding 
Resin ID (ISO 1043)

  • PET

Physical
Nominal Value
Unit
Test Method
Density
1.40
g/cm³
ISO 1183
Water Absorption (Equilibrium, 73°F, 50% RH)
0.30
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
326000
psi
ISO 527-2
Tensile Stress (Yield)
7250
psi
ISO 527-2
Tensile Strain (Yield)
4.0
%
ISO 527-2
Nominal Tensile Strain at Break
> 50
%
ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
4.8
ft·lb/in²
ISO 179/1eA
Thermal
Nominal Value
Unit
Test Method
Melting Temperature 2
491
°F
ISO 11357-3
CLTE


ISO 11359-2
Flow
4.2E-5
in/in/°F

Transverse
4.2E-5
in/in/°F

Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
> 1.0E+15
ohms·cm
IEC 60093
Fill Analysis
Nominal Value
Unit
Test Method
Melt Thermal Conductivity
1.4
Btu·in/hr/ft²/°F

Specific Heat Capacity of Melt
0.490
Btu/lb/°F

Additional Information
Nominal Value
Unit
Test Method
RSV - m-cresol, 1g/100ml
2.10

Internal Method
Injection
Nominal Value
Unit

Drying Temperature
212 to 248
°F

Drying Time
3.0 to 12
hr

Rear Temperature
518 to 536
°F

Middle Temperature
518 to 554
°F

Front Temperature
518 to 554
°F

Nozzle Temperature
518 to 554
°F

Processing (Melt) Temp
518 to 554
°F

Mold Temperature
266 to 284
°F

Injection Rate
Moderate-Fast


Back Pressure
435 to 1450
psi

Screw Compression Ratio
2.5:1.0



Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields


Consultation

Shanghai Langqi Plastic Materials Co., Ltd.   沪ICP备12022668号 公安机关备案号：31011202003696

展开