Products

EcoPaXX® Q150E

EcoPaXX® Q150E

Manufacturer: DSM
Produced At:
 Europe / China
Product Category: Polyamide 410
PA410
Product No: EcoPaXX Q150E 
Product Quantity: 25KG / BAG
Product Features:
Low Viscosity,Medium Viscosity

EcoPaXX® Q150E

Polyamide 410
Product Description:
Film Extrusion, Low/Medium Viscosity, Extrusion

Special Features:
  • Low viscosity

  • Medium viscosity


EcoPaXX® is our bio-based, high-performance polyamide (PA410) that offers outstanding performance across the board, while being made mainly from tropical castor beans which don€™t compete with the food chain.
EcoPaXX® belongs to the family of long-chain polyamides, which offer exceptional performance in the most demanding of environments. That includes excellent chemical resistance, low moisture absorption, combined with a very high melting point (highest of all bio-plastics) and high crystallization rate (typical for engineering plastics like PA66 and PA46).
And€¦ EcoPaXX® is certified 100% carbon neutral from cradle to gate. That means the amount of carbon dioxide emitted during the production of EcoPaXX is offset by the amount absorbed in plant growth, and in particular by thericcinus communis €" the tropical castor bean plant that makes up some 70% of EcoPaXX.

Features 
  • Low Viscosity,Medium Viscosity 
Processing Method 
  • Extrusion,Injection Molding 
Resin ID (ISO 1043)
  • PA410

Physical
Nominal Value
Unit
Test Method
Density
1.09
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (280°C/2.16 kg)
3.78
in³/10min
ISO 1133
Water Absorption


ISO 62
Saturation, 73°F
5.8
%

Equilibrium, 73°F, 50% RH
1.9
%

Viscosity Number
150
cm³/g
ISO 307
Biobased Content
70
%
ASTM D6866B
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
435000
psi
ISO 527-2
Tensile Stress (Break)
10900
psi
ISO 527-2
Tensile Strain


ISO 527-2
Yield
4.5
%

Break
10
%

Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength


ISO 179/1eA
-22°F
1.7
ft·lb/in²

73°F
2.5
ft·lb/in²

Charpy Unnotched Impact Strength (73°F)
No Break

ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Melting Temperature 2
482
°F
ISO 11357-3
Injection
Nominal Value
Unit

Drying Temperature
176
°F

Drying Time
4.0 to 8.0
hr

Rear Temperature
482 to 518
°F

Middle Temperature
500 to 536
°F

Front Temperature
518 to 554
°F

Nozzle Temperature
518 to 572
°F

Processing (Melt) Temp
518 to 572
°F

Mold Temperature
140 to 212
°F

Injection Rate
Moderate-Fast


Back Pressure
435 to 1450
psi

Screw Compression Ratio
2.5:1.0




Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields


Consultation
展开