Products

EcoPaXX® Q150-D

EcoPaXX® Q150-D

Manufacturer: DSM
Produced At:
 Europe / China
Product Category: Polyamide 410
PA410
Product No: EcoPaXX Q150-D 
Product Quantity: 25KG / BAG
Product Features: Low Viscosity,Medium Viscosity

EcoPaXX® Q150-D

Polyamide 410
Product Description:
Low/Medium Viscosity

Special Features:
  • Contains release agent

  • Low viscosity

  • Medium viscosity


EcoPaXX® is our bio-based, high-performance polyamide (PA410) that offers outstanding performance across the board, while being made mainly from tropical castor beans which don€™t compete with the food chain.
EcoPaXX® belongs to the family of long-chain polyamides, which offer exceptional performance in the most demanding of environments. That includes excellent chemical resistance, low moisture absorption, combined with a very high melting point (highest of all bio-plastics) and high crystallization rate (typical for engineering plastics like PA66 and PA46).
And€¦ EcoPaXX® is certified 100% carbon neutral from cradle to gate. That means the amount of carbon dioxide emitted during the production of EcoPaXX is offset by the amount absorbed in plant growth, and in particular by thericcinus communis €" the tropical castor bean plant that makes up some 70% of EcoPaXX.

Additive 
  • Mold Release

Features 
  • Low Viscosity,Medium Viscosity 
Processing Method 
  • Injection Molding

Resin ID (ISO 1043)
  • PA410

Physical
Dry
Conditioned
Unit
Test Method
Density
1.09
--
g/cm³
ISO 1183
Molding Shrinkage



ISO 294-4
Across Flow
1.3
--
%

Flow
1.2
--
%

Water Absorption (Equilibrium, 73°F, 50% RH)
2.0
--
%
ISO 62
Viscosity Number
150
--
cm³/g
ISO 307
Biobased Content
70
--
%
ASTM D6866B
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
450000
247000
psi
ISO 527-2
Tensile Stress (Yield)
12300
8700
psi
ISO 527-2
Tensile Strain (Yield)
5.0
16
%
ISO 527-2
Nominal Tensile Strain at Break
16
> 50
%
ISO 527-2
Flexural Modulus
421000
210000
psi
ISO 178
Flexural Stress
16700
7980
psi
ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength



ISO 179/1eA
-22°F
1.9
--
ft·lb/in²

73°F
2.4
6.2
ft·lb/in²

Charpy Unnotched Impact Strength



ISO 179/1eU
-22°F
No Break
No Break


73°F
No Break
No Break


Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature




66 psi, Unannealed
347
--
°F
ISO 75-2/B
264 psi, Unannealed
171
--
°F
ISO 75-2/A
Melting Temperature 3
482
--
°F
ISO 11357-3
CLTE



ISO 11359-2
Flow
3.9E-5
--
in/in/°F

Transverse
5.0E-5
--
in/in/°F

Flammability
Dry
Conditioned
Unit
Test Method
Glow Wire Flammability Index (0.031 in)
1520
--
°F
IEC 60695-2-12
Glow Wire Ignition Temperature(0.031 in)
1560
--
°F
IEC 60695-2-13
Injection
Dry
Unit

Drying Temperature
176
°F

Drying Time
4.0 to 8.0
hr

Rear Temperature
482 to 518
°F

Middle Temperature
500 to 536
°F

Front Temperature
518 to 554
°F

Nozzle Temperature
518 to 572
°F

Processing (Melt) Temp
518 to 572
°F

Mold Temperature
140 to 212
°F

Injection Rate
Moderate-Fast


Back Pressure
435 to 1450
psi

Screw Compression Ratio
2.5:1.0




Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields


Consultation
展开