Radiflam® A FR 100 NAT (16090)
Polyamide 66
PA66 flame retardant injection moulding grade. Halogen and phosphorus free. Natural colour.
Suitable for parts where fire retardancy is required. Rated V-0 at 0.4 mm according to UL-94.
Also suitable for monofilament extrusion.
Additive | |
Features | - Flame Retardant，Halogen Free，Low (to None) Phosphorus Content
|
Uses | |
RoHS Compliance | |
Appearance | |
Processing Method | - Filament Extrusion，Injection Molding
|
Resin ID (ISO 1043) | |
Density | 1.16 | -- | g/cm³ | ISO 1183 |
Molding Shrinkage 3 |
|
|
| ISO 294-4 |
Across Flow | 1.4 | -- | % |
|
Flow | 1.4 | -- | % |
|
Water Absorption |
|
|
| ISO 62 |
Saturation, 73°F, 0.0787 in | 7.7 | -- | % |
|
Equilibrium, 73°F, 0.0787 in, 50% RH | 1.8 | -- | % |
|
Tensile Modulus | 500000 | 377000 | psi | ISO 527-2/1A/1 |
Tensile Stress (Yield) | 11200 | 7250 | psi | ISO 527-2/1A/50 |
Nominal Tensile Strain at Break | 12 | > 50 | % | ISO 527-2/1A/50 |
Flexural Modulus 4 | 464000 | -- | psi | ISO 178 |
Flexural Stress 4 | 16700 | -- | psi | ISO 178 |
Charpy Notched Impact Strength |
|
|
| ISO 179/1eA |
-22°F | 1.9 | -- | ft·lb/in² |
|
73°F | 2.1 | 3.1 | ft·lb/in² |
|
Heat Deflection Temperature |
|
|
|
|
66 psi, Unannealed | 392 | -- | °F | ISO 75-2/Bf |
264 psi, Unannealed | 158 | -- | °F | ISO 75-2/Af |
Vicat Softening Temperature | 428 | -- | °F | ISO 306/B50 |
Melting Temperature 5 | 500 | -- | °F | ISO 11357-3 |
Surface Resistivity 6 | 1.0E+12 | 1.0E+10 | ohms | IEC 60093 |
Volume Resistivity 6 | 1.0E+15 | 1.0E+13 | ohms·cm | IEC 60093 |
Comparative Tracking Index(Solution A) | 600 | -- | V | IEC 60112 |
Flame Rating |
|
|
| UL 94 |
0.016 in | V-0 | -- |
|
|
0.031 in | V-0 | -- |
|
|
Glow Wire Flammability Index |
|
|
| IEC 60695-2-12 |
0.04 in | 1760 | -- | °F |
|
0.08 in | 1760 | -- | °F |
|
Glow Wire Ignition Temperature |
|
|
| IEC 60695-2-13 |
0.04 in | > 1430 | -- | °F |
|
0.08 in | > 1380 | -- | °F |
|
Flammability | 0 | -- | in/min | FMVSS 302 |
Railway Classification | I2/F2 | -- |
| NF F16-101 |
Drying Temperature - Desiccant Dryer | 176 | °F |
|
Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr |
|
Dew Point - Desiccant Dryer | -4 | °F |
|
Suggested Max Moisture | 0.10 | % |
|
Processing (Melt) Temp | 518 to 554 | °F |
|
Mold Temperature | 140 to 176 | °F |
|
Injection Rate | Moderate |
|
|
Melt Temperature | 518 to 554 | °F |
|
