VESTAMID® L L2122
Polyamide 12
Plasticized VESTAMID® polyamide 12 compounds
Characterization: high viscosity, plasticized, light and heat stabilized, with processing aid
Applications: fuel, vacuum, and hydraulic lines, steel cable sheathing
In general, it can be said that long-chain, semi-crystalline polyamides absorb little water, are resistant to polar and non-polar solvents, exhibit low creep behavior and high impact resistance and can be used in a wide temperature range. Virtually no other polymer material in this price range exhibits these properties.
Additive | - Heat Stabilizer，Plasticizer，Processing Aid，UV Stabilizer
|
Features | - Abrasion Resistant，Excellent Processability，Fatigue Resistant，Food Contact Acceptable，Fuel Resistant，Grease Resistant，Heat Stabilized，High ESCR (Stress Crack Resist.)，High Impact Resistance，High Viscosity，Light Stabilized，Low Friction，Low Temperature Impact Resistance，Low to No Water Absorption，Noise Damping，Oil Resistant，Plasticized，Semi Crystalline，Solvent Resistant，Vibration Damping
|
Uses | - Cable Jacketing，Fuel Lines，Hydraulic Applications
|
Agency Ratings | - EU 10/2011，FDA 21 CFR 177.1500
|
Appearance | - Colors Available，Natural Color
|
Forms | |
Processing Method | |
Density | 1.03 | g/cm³ | ISO 1183 |
Molding Shrinkage |
|
| ISO 294-4 |
Across Flow | 1.6 | % |
|
Flow | 0.60 | % |
|
Water Absorption (Equilibrium, 73°F, 50% RH) | 0.50 | % | ISO 62 |
Tensile Modulus | 71100 | psi | ISO 527-2 |
Tensile Stress (Yield) | 4350 | psi | ISO 527-2 |
Tensile Strain |
|
| ISO 527-2 |
Yield | 26 | % |
|
Break | > 50 | % |
|
Charpy Notched Impact Strength |
|
| ISO 179/1eA |
-22°F, Complete Break | 2.9 | ft·lb/in² |
|
73°F, Partial Break | 32 | ft·lb/in² |
|
Charpy Unnotched Impact Strength |
|
| ISO 179/1eU |
-22°F | No Break |
|
|
73°F | No Break |
|
|
Heat Deflection Temperature |
|
|
|
66 psi, Unannealed | 203 | °F | ISO 75-2/B |
264 psi, Unannealed | 113 | °F | ISO 75-2/A |
Vicat Softening Temperature |
|
|
|
-- | 329 | °F | ISO 306/A |
-- | 257 | °F | ISO 306/B |
Melting Temperature 2 | 343 | °F | ISO 11357-3 |
CLTE - Flow (73 to 131°F) | 9.4E-5 | in/in/°F | ISO 11359-2 |
Volume Resistivity | 1.0E+13 | ohms·cm | IEC 60093 |
Electric Strength | 810 | V/mil | IEC 60243-1 |
Relative Permittivity |
|
| IEC 60250 |
73°F, 100 Hz | 10.0 |
|
|
73°F, 1 MHz | 3.30 |
|
|
Dissipation Factor |
|
| IEC 60250 |
73°F, 100 Hz | 0.19 |
|
|
73°F, 1 MHz | 0.10 |
|
|
Comparative Tracking Index |
|
| IEC 60112 |
-- | 600 | V |
|
Solution A 3 | > 600 | V |
|
Flammability Classification |
|
| IEC 60695-11-10, -20 |
0.06 in | HB |
|
|
0.13 in | HB |
|
|
Electrolytical Corrosion | A1 |
| IEC 60426 |
ISO Shortname | PA12-P, EHL, 22-005 |
| ISO 1874 |
