VESTAMID® L L1723
Polyamide 12
Plasticized VESTAMID® polyamide 12 compounds
Characterization: low viscosity, plasticized, heat stabilized, with mold release agent
Applications: cable ties, fastening elements
In general, it can be said that long-chain, semi-crystalline polyamides absorb little water, are resistant to polar and non-polar solvents, exhibit low creep behavior and high impact resistance and can be used in a wide temperature range. Virtually no other polymer material in this price range exhibits these properties.
Additive | - Heat Stabilizer，Mold Release，Plasticizer
|
Features | - Abrasion Resistant，Excellent Processability，Fatigue Resistant，Food Contact Acceptable，Fuel Resistant，Good Mold Release，Grease Resistant，Heat Stabilized，High ESCR (Stress Crack Resist.)，High Impact Resistance，Low Friction，Low Temperature Impact Resistance，Low to No Water Absorption，Low Viscosity，Noise Damping，Oil Resistant，Plasticized，Semi Crystalline，Solvent Resistant，Vibration Damping
|
Uses | |
Agency Ratings | - EU 10/2011，FDA 21 CFR 177.1500
|
Appearance | - Colors Available，Natural Color
|
Forms | |
Processing Method | |
Density | 1.03 | g/cm³ | ISO 1183 |
Molding Shrinkage |
|
| ISO 294-4 |
Across Flow | 1.5 | % |
|
Flow | 1.7 | % |
|
Water Absorption (Equilibrium, 73°F, 50% RH) | 0.50 | % | ISO 62 |
Tensile Modulus | 69600 | psi | ISO 527-2 |
Tensile Stress (Yield) | 4350 | psi | ISO 527-2 |
Tensile Strain |
|
| ISO 527-2 |
Yield | 27 | % |
|
Break | > 50 | % |
|
Charpy Notched Impact Strength |
|
| ISO 179/1eA |
-22°F, Complete Break | 2.4 | ft·lb/in² |
|
73°F, Complete Break | 11 | ft·lb/in² |
|
Charpy Unnotched Impact Strength |
|
| ISO 179/1eU |
-22°F | No Break |
|
|
73°F | No Break |
|
|
Heat Deflection Temperature |
|
|
|
66 psi, Unannealed | 203 | °F | ISO 75-2/B |
264 psi, Unannealed | 113 | °F | ISO 75-2/A |
Vicat Softening Temperature |
|
|
|
-- | 329 | °F | ISO 306/A |
-- | 266 | °F | ISO 306/B |
Melting Temperature 3 | 343 | °F | ISO 11357-3 |
CLTE - Flow (73 to 131°F) | 1.0E-4 | in/in/°F | ISO 11359-2 |
Volume Resistivity | 1.0E+12 | ohms·cm | IEC 60093 |
Electric Strength | 840 | V/mil | IEC 60243-1 |
Relative Permittivity |
|
| IEC 60250 |
73°F, 100 Hz | 10.0 |
|
|
73°F, 1 MHz | 3.70 |
|
|
Dissipation Factor |
|
| IEC 60250 |
73°F, 100 Hz | 0.16 |
|
|
73°F, 1 MHz | 0.12 |
|
|
Comparative Tracking Index |
|
| IEC 60112 |
-- | 600 | V |
|
Solution A 4 | > 600 | V |
|
Flammability Classification |
|
| IEC 60695-11-10, -20 |
0.06 in | HB |
|
|
0.13 in | HB |
|
|
Electrolytical Corrosion | A1 |
| IEC 60426 |
ISO Shortname | PA12-P, MHL, 14-005 |
| ISO 1874 |
