VESTAMID® E 62-S3
Polyamide 12
Typical Applications: alpine ski boots, noiseless gears, conveyor belts
PA 12 elastomers, the most important subgroup of polyamide elastomers, belong to the increasingly important material class of thermoplastic elastomers (TPE). Because of their excellent properties, they are indispensable in many applications.
PA 12 elastomers are block copolymers consisting of PA 12 segments and polyether segments. PA 12-rich products have the major properties of PA 12, while the elastomer characteristics become more apparent with increasing polyether content. That is the polymers become more flexible, with higher impact strength at cold temperatures.
Additive | - Heat Stabilizer，UV Stabilizer
|
Features | - Block Copolymer，Chemical Resistant，Good Colorability，Good Printability，Good Processability，Heat Stabilized，High Elasticity，Light Stabilized，Low Density，Low Temperature Impact Resistance，Solvent Resistant
|
Uses | - Conveyor Parts，Gears，Sporting Goods
|
Appearance | - Black，Colors Available，Natural Color
|
Forms | |
Processing Method | - Extrusion，Injection Molding
|
Density | 1.03 | g/cm³ | ISO 1183 |
Molding Shrinkage |
|
| ISO 294-4 |
Across Flow : 0.118 in | 0.90 to 1.4 | % |
|
Flow : 0.118 in | 0.60 to 1.1 | % |
|
Water Absorption (Saturation, 73°F) | 1.1 | % | ISO 62 |
Viscosity Number | 190 | cm³/g | ISO 307 |
Shore Hardness (Shore D) | 62 |
| ISO 868 |
Tensile Modulus | 53700 | psi | ISO 527-2 |
Tensile Stress |
|
| ISO 527-2 |
-- | 6090 | psi |
|
50% Strain | 3340 | psi |
|
Tensile Strain (Break) | > 200 | % | ISO 527-2 |
Tensile Creep Modulus (1000 hr) | 29000 | psi | ISO 899-1 |
Charpy Notched Impact Strength |
|
| ISO 179/1eA |
-22°F, Complete Break | 3.8 | ft·lb/in² |
|
73°F, Partial Break | 57 | ft·lb/in² |
|
Charpy Unnotched Impact Strength |
|
| ISO 179/1eU |
-22°F | No Break |
|
|
73°F | No Break |
|
|
Heat Deflection Temperature |
|
|
|
66 psi, Unannealed | 212 | °F | ISO 75-2/B |
264 psi, Unannealed | 113 | °F | ISO 75-2/A |
Vicat Softening Temperature |
|
|
|
-- | 329 | °F | ISO 306/A |
-- | 230 | °F | ISO 306/B |
CLTE |
|
| ISO 11359-2 |
Flow : 73 to 131°F | 1.1E-4 | in/in/°F |
|
Transverse : 73 to 131°F | 1.1E-4 | in/in/°F |
|
Surface Resistivity | 1.0E+14 | ohms | IEC 60093 |
Volume Resistivity | 1.0E+12 | ohms·cm | IEC 60093 |
Electric Strength | 990 | V/mil | IEC 60243-1 |
Relative Permittivity |
|
| IEC 60250 |
73°F, 100 Hz | 9.00 |
|
|
73°F, 1 MHz | 4.00 |
|
|
Dissipation Factor |
|
| IEC 60250 |
73°F, 100 Hz | 0.10 |
|
|
73°F, 1 MHz | 0.12 |
|
|
Comparative Tracking Index (Solution A) | 600 | V | IEC 60112 |
Flammability Classification (0.06 in) | HB |
| IEC 60695-11-10, -20 |
Suggested Max Moisture | 0.10 | % |
|
Processing (Melt) Temp | 374 to 446 | °F |
|
Mold Temperature | 68 to 104 | °F |
|
Suggested Max Moisture | 0.10 | % |
|
Melt Temperature | 374 to 446 | °F |
|
