Products

TECHNYL® A 217 BLACK 1N

TECHNYL® A 217 BLACK 1N

Manufacturer: SOLVAY
Produced At: Import/ China
Product Category: TECHNYL PA66
Product No: TECHNYL A 217 BLACK 1NL
Product Quantity: 25KG / BAG
Product Features: Good Flow，Good Mold Release，Heat Stabilized - Inorganic，Metallizable

TECHNYL® A 217 BLACK 1N

Polyamide 66
Product Description:
TECHNYL® A 217 Black 1 N is an unreinforced polyamide 66, heat stabilized, standard viscosity, for injection moulding. This grade offers all the primary properties of unreinforced polyamide 66. In addition it has improved resistance to high temperature and it can be used for components which have to withstand mid term temperature stresses. This grade can also be vacuum metalized with very good surface quality and adhesion of the aluminum surface.
Additive 

  • Heat Stabilizer

Features 
  • Good Flow，Good Mold Release，Heat Stabilized - Inorganic，Metallizable 
Uses 
  • Automotive Applications，Connectors，Electrical/Electronic Applications
Agency Ratings 
  • EC 1907/2006 (REACH)EN 45545NF F 16-101UL QMFZ2 
RoHS Compliance 

  • RoHS Compliant

Appearance 
  • Black，Natural Color 
Forms 

  • Pellets

Processing Method 

  • Injection Molding

Multi-Point Data 

  • Isothermal Stress vs. Strain (ISO 11403-1)

Resin ID (ISO 1043)

  • PA66

Physical
Dry
Conditioned
Unit
Test Method
Density
1.14
--
g/cm³
ISO 1183/A
Molding Shrinkage



ISO 294-4
Across Flow
1.4
--
%

Flow
1.4
--
%

Water Absorption



ISO 62
73°F, 24 hr
1.3
--
%

Equilibrium, 73°F, 50% RH
2.9
--
%

Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus (73°F)
508000
247000
psi
ISO 527-2/1A
Tensile Strength




Yield, 73°F
12300
--
psi
ASTM D638
Yield, 73°F
13800
8700
psi
ISO 527-2/1A
Break, 73°F
8700
6530
psi
ISO 527-2/1A
Tensile Strain




Yield, 73°F
4.5
10
%
ISO 527-2
Break, 73°F
30
--
%
ASTM D638
Break, 73°F
> 30
> 150
%
ISO 527-2
Flexural Modulus




73°F
508000
--
psi
ASTM D790
73°F
450000
210000
psi
ISO 178
Flexural Strength




73°F
18100
--
psi
ASTM D790
73°F
18900
11600
psi
ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength(73°F)
2.1
5.2
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength(73°F)
No Break
No Break

ISO 179/1eU
Notched Izod Impact




73°F
1.5
--
ft·lb/in
ASTM D256
73°F
1.9
4.8
ft·lb/in²
ISO 180
Unnotched Izod Impact Strength(73°F)
No Break
No Break

ISO 180/1U
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load




66 psi, Unannealed
428
--
°F
ASTM D648
66 psi, Unannealed
410
--
°F
ISO 75-2/Bf
264 psi, Unannealed
167
--
°F
ASTM D648, ISO 75-2/Af
Melting Temperature
504
--
°F
ISO 11357-3
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
1.0E+15
1.0E+14
ohms
IEC 60093
Volume Resistivity
1.0E+15
1.0E+16
ohms·cm
IEC 60093
Electric Strength (0.0787 in)
640
560
V/mil
IEC 60243-1
Relative Permittivity
2.90
3.20

IEC 60250
Dissipation Factor
0.030
0.080

IEC 60250
Comparative Tracking Index



IEC 60112
Solution A
600
600
V

Solution B
450
--
V

Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating



UL 94
0.06 in
V-2
--


0.13 in
V-2
--


Glow Wire Flammability Index



IEC 60695-2-12
0.031 in
1200
--
°F

0.06 in
1200
--
°F

Glow Wire Ignition Temperature(0.06 in)
1200
--
°F
IEC 60695-2-13
Oxygen Index
26
--
%
ISO 4589-2
French Fire Index
F2
--

NF F16-101
French Smoke Index
I3
--

NF F16-101
Additional Information
Dry
Conditioned

Test Method
European Railways Certifications



EN 45545-2
R22
HL2
--


R23
HL2
--


Injection
Dry
Unit

Drying Temperature
176
°F

Suggested Max Moisture
0.20
%

Rear Temperature
509 to 527
°F

Middle Temperature
518 to 536
°F

Front Temperature
536 to 545
°F

Mold Temperature
140 to 176
°F

Injection Notes
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4h

Injection Advice:

  • For unfilled polyamides, Solvay recommends the use of high alloy steel with a low chromium content. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm). In the case of high requirements on surface quality a mould temperature of up to 120°C can be considered.

  • The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design


Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields


Consultation

Shanghai Langqi Plastic Materials Co., Ltd.   沪ICP备12022668号 公安机关备案号：31011202003696

展开