Products

CYCOLOY™ FR Resin C2950

CYCOLOY™ FR Resin C2950

Manufacturer: SABIC
Produced At: Import/ China
Product Category: Polycarbonate + ABS
Product No: CYCOLOY FR Resin C2950
Product Quantity: 25KG / BAG
Product Features: Bromine Free，Chlorine Free，Flame Retardant，Good Flow，Good Impact Resistance，Medium Heat Resistance

CYCOLOY™ FR Resin C2950

Polycarbonate + ABS
Product Description:
CYCOLOY C2950 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) resin is a standard high heat grade that can be injection molded. This non-chlorinated, non-brominated flame retardant high heat PC/ABS has a UL V0 & 5VB flame rating. CYCOLOY C2950 resin is an excellent candidate for a wide variety of applications including appliances, lighting and electrical.
Additive 

  • Flame Retardant

Features 
  • Bromine Free，Chlorine Free，Flame Retardant，Good Flow，Good Impact Resistance，Medium Heat Resistance
Uses 
  • Appliances，Automotive Applications，Automotive Exterior Parts，Construction Applications，Electrical/Electronic Applications，Electronic Displays，Fluid Handling，Lawn and Garden Equipment，Lighting Applications，Medical/Healthcare Applications，Non-specific Food Applications，Outdoor Applications
Processing Method 

  • Injection Molding

Multi-Point Data 

  • Coefficient of Thermal Expansion vs. Temperature (ASTM E831)

  • Elastic Modulus vs Temperature (ASTM D4065)

  • Flexural DMA (ASTM D4065)

  • Instrumented Impact (Energy) (ASTM D3763)

  • Instrumented Impact (Load) (ASTM D3763)

  • Pressure-Volume-Temperature (PVT - Zoller Method)

  • Shear DMA (ASTM D4065)

  • Specific Heat vs. Temperature (ASTM D3417)

  • Tensile Creep (ASTM D2990)

  • Tensile Fatigue

  • Tensile Stress vs. Strain (ASTM D638)

  • Thermal Conductivity vs. Temperature (ASTM E1530)

  • Viscosity vs. Shear Rate (ASTM D3835)

Also Available In 

  • Asia Pacific

Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity


ASTM D792
--
1.18


-- 3
1.22


Melt Mass-Flow Rate (MFR) (260°C/2.16 kg)
10
g/10 min
ASTM D1238
Molding Shrinkage


Internal Method
Flow : 0.126 in
4.0E-3 to 6.0E-3
in/in

Across Flow : 0.126 in
4.0E-3 to 6.0E-3
in/in

Water Absorption


ASTM D570
24 hr
0.10
%

Equilibrium, 73°F
0.40
%

Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
123

ASTM D785
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 4 (Yield)
8990
psi
ASTM D638
Tensile Elongation 4 (Break)
40
%
ASTM D638
Flexural Modulus 5 (3.94 in Span)
384000
psi
ASTM D790
Flexural Strength 5 (Yield, 3.94 in Span)
14800
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact


ASTM D256
-22°F
3.0
ft·lb/in

73°F
10
ft·lb/in

Instrumented Dart Impact


ASTM D3763
-22°F, Total Energy
478
in·lb

73°F, Total Energy
540
in·lb

Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load


ASTM D648
66 psi, Unannealed, 0.252 in
219
°F

264 psi, Unannealed, 0.126 in
194
°F

264 psi, Unannealed, 0.252 in
203
°F

Vicat Softening Temperature
234
°F
ASTM D1525 6
CLTE


ASTM D696
Flow : -22 to 86°F
4.0E-5
in/in/°F

Transverse : -22 to 86°F
4.0E-5
in/in/°F

Thermal Conductivity
1.4
Btu·in/hr/ft²/°F
ASTM C177
RTI Elec
185
°F
UL 746
RTI Imp
185
°F
UL 746
RTI Str
185
°F
UL 746
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
> 1.0E+16
ohms
ASTM D257
Volume Resistivity
1.0E+17
ohms·cm
ASTM D257
Dielectric Strength (0.126 in, in Oil)
490
V/mil
ASTM D149
Dielectric Constant


ASTM D150
60 Hz
3.00


100 Hz
3.00


50 kHz
3.00


Dissipation Factor


ASTM D150
50 Hz
5.0E-3


60 Hz
5.0E-3


100 Hz
4.9E-3


Arc Resistance 7
PLC 6

ASTM D495
Comparative Tracking Index (CTI)
PLC 1

UL 746
High Amp Arc Ignition (HAI) 8
PLC 0

UL 746
High Voltage Arc Tracking Rate (HVTR)
PLC 2

UL 746
Hot-wire Ignition (HWI)
PLC 1

UL 746
Flammability
Nominal Value
Unit
Test Method
Flame Rating


UL 94
0.06 in
V-0


0.10 in
5VB


Oxygen Index
32
%
ASTM D2863
Injection
Nominal Value
Unit

Drying Temperature
176 to 194
°F

Drying Time
3.0 to 4.0
hr

Suggested Max Moisture
0.040
%

Suggested Shot Size
30 to 80
%

Rear Temperature
428 to 491
°F

Middle Temperature
428 to 527
°F

Front Temperature
473 to 527
°F

Nozzle Temperature
473 to 527
°F

Processing (Melt) Temp
473 to 527
°F

Mold Temperature
140 to 176
°F

Back Pressure
43.5 to 102
psi

Screw Speed
40 to 70
rpm

Vent Depth
1.5E-3 to 3.0E-3
in


Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields


Consultation

Shanghai Langqi Plastic Materials Co., Ltd.   沪ICP备12022668号 公安机关备案号：31011202003696

展开