Shanghai Langqi Plastic Materials Co., Ltd.

Radilon® S CP300 100 NAT

Manufacturer: RADICI
Produced At: Europe / China
Product Category: Polyamide 6 (Nylon 6)
Product No: Radilon S CP300 100 NAT
Product Quantity: 25KG / BAG
Product Features: Good Dimensional Stability，Low Shrinkage，Low Warpage

Product information

Radilon® S CP300 100 NAT

Polyamide 6

Radici Plastics

Product Description:

PA6 30% mineral filled injection moulding grade. Natural colour.

Suitable for parts requiring good dimensional stability and mechanical properties, reduced shrinkage and low warpage.

ISO 1043 : PA6 MX30

Filler / Reinforcement	Mineral, 30% Filler by Weight
Features	Good Dimensional Stability，Low Shrinkage，Low Warpage
RoHS Compliance	RoHS Compliant
Appearance	Natural Color
Processing Method	Injection Molding
Resin ID (ISO 1043)	PA6 MX30

Physical	Dry	Conditioned	Unit	Test Method
Density	1.35	--	g/cm³	ISO 1183
Water Absorption				ISO 62
Saturation, 73°F, 0.0787 in	7.3	--	%
Equilibrium, 73°F, 0.0787 in, 50% RH	2.1	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	732000	341000	psi	ISO 527-2/1A/1
Tensile Stress (Yield)	11600	7980	psi	ISO 527-2/1A/5
Tensile Strain (Yield)	3.5	19	%	ISO 527-2/1A/5
Nominal Tensile Strain at Break	13	35	%	ISO 527-2/1A/5
Flexural Modulus 2	645000	--	psi	ISO 178
Flexural Stress 2	18100	--	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	1.7	--	ft·lb/in²
73°F	2.6	3.1	ft·lb/in²
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	33	--	ft·lb/in²
73°F	36	40	ft·lb/in²

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	374	--	°F	ISO 75-2/Bf
264 psi, Unannealed	194	--	°F	ISO 75-2/Af
Vicat Softening Temperature	401	--	°F	ISO 306/B50
Melting Temperature 3	428	--	°F	ISO 11357

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	1.0E+12	1.0E+10	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+13	ohms·cm	IEC 60093
Comparative Tracking Index	600	--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Burning Rate	0.0	--	in/min	FMVSS 302
Flame Rating (0.031 in)	HB	--		UL 94
Glow Wire Flammability Index (0.08 in)	1200	--	°F	IEC 60695-2-12

Injection	Dry	Unit
Drying Temperature - Desiccant Dryer	176	°F
Drying Time - Desiccant Dryer	2.0 to 4.0	hr
Dew Point - Desiccant Dryer	< -4	°F
Suggested Max Moisture	0.15	%
Processing (Melt) Temp	464 to 536	°F
Mold Temperature	176 to 194	°F
Injection Rate	Moderate-Fast

Products

Products

Radilon® S CP300 100 NAT

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service