Shanghai Langqi Plastic Materials Co., Ltd.

Radilon® S 35F 100 NAT

Manufacturer: RADICI
Produced At: Europe / China
Product Category: Polyamide 6 (Nylon 6)
Product No: Radilon S 35F 100 NAT
Product Quantity: 25KG / BAG
Product Features: Medium-high Viscosity

Product information

Radilon® S 35F 100 NAT

Polyamide 6

Radici Plastics

Product Description:

PA6 medium-high viscosity extrusion grade. Natural colour.

Suitable for extrusion of cast and blown films, and monofilaments.

ISO 1043 : PA6

Features	Medium-high Viscosity
Uses	Blown Film，Cast Film，Monofilaments
RoHS Compliance	RoHS Compliant
Appearance	Natural Color
Processing Method	Extrusion，Injection Molding
Resin ID (ISO 1043)	PA6

Physical	Dry	Conditioned	Unit	Test Method
Density	1.14	--	g/cm³	ISO 1183
Water Absorption				ISO 62
Saturation, 73°F, 0.0787 in	10	--	%
Equilibrium, 73°F, 0.0787 in, 50% RH	2.9	--	%
Viscosity Number (H2SO4 (Sulphuric Acid))	205	--	cm³/g	ISO 307

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	421000	174000	psi	ISO 527-2/1A/1
Tensile Stress (Yield)	10900	5800	psi	ISO 527-2/1A/50
Tensile Strain (Yield)	4.0	30	%	ISO 527-2/1A/50
Nominal Tensile Strain at Break	> 50	> 50	%	ISO 527-2/1A/50
Flexural Modulus 2	363000	109000	psi	ISO 178
Flexural Stress 2	14500	4350	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	2.9	--	ft·lb/in²
73°F	3.3	--	ft·lb/in²

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	338	--	°F	ISO 75-2/Bf
264 psi, Unannealed	131	--	°F	ISO 75-2/Af
Vicat Softening Temperature	383	--	°F	ISO 306/B50
Melting Temperature 3	428	--	°F	ISO 11357

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	1.0E+12	1.0E+10	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+13	ohms·cm	IEC 60093
Comparative Tracking Index	600	--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Burning Rate	0.0	--	in/min	FMVSS 302
Flame Rating (0.031 in)	HB	--		UL 94
Glow Wire Flammability Index				IEC 60695-2-12
0.04 in	1560	--	°F
0.08 in	1520	--	°F
Glow Wire Ignition Temperature				IEC 60695-2-13
0.04 in	1610	--	°F
0.08 in	1290	--	°F

Injection	Dry	Unit
Drying Temperature - Desiccant Dryer	176	°F
Drying Time - Desiccant Dryer	2.0 to 4.0	hr
Dew Point - Desiccant Dryer	< -4	°F
Suggested Max Moisture	0.15	%
Processing (Melt) Temp	482 to 536	°F
Mold Temperature	158 to 176	°F
Injection Rate	Moderate
Extrusion	Dry	Unit
Drying Temperature	176	°F
Drying Time	2.0 to 4.0	hr
Suggested Max Moisture	0.15	%
Melt Temperature	464 to 518	°F

Products

Products

Radilon® S 35F 100 NAT

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service