Products

Radilon® CS 34FL 100 NAT

Radilon® CS 34FL 100 NAT

Manufacturer: RADICI
Produced At:
 Europe / China
Product Category: Polyamide 66/6 (Nylon 66/6)
Product No: Radilon CS 34FL 100 NAT 
Product Quantity: 25KG / BAG
Product Features: 
Copolymer,Medium-high Viscosity

Radilon® CS 34FL 100 NAT

Polyamide 66/6 Copolymer
Product Description:

PA6/66 copolymer, medium-high viscosity extrusion grade. Natural colour.
Suitable for extrusion of cast, blown and co-extruded films, and monofilaments.


Features 
  • Copolymer,Medium-high Viscosity 
Uses 
  • Blown Film,Cast Film,Film,Monofilaments 
RoHS Compliance 
  • RoHS Compliant

Appearance 
  • Natural Color

Processing Method 
  • Blown Film,Cast Film,Coextruded Film,Extrusion,Filament Extrusion
Resin ID (ISO 1043)
  • PA6/66

Physical
Dry
Conditioned
Unit
Test Method
Density
1.14
--
g/cm³
ISO 1183
Water Absorption



ISO 62
Saturation, 73°F, 0.0787 in
10
--
%

Equilibrium, 73°F, 0.0787 in, 50% RH
3.0
--
%

Viscosity Number (H2SO4 (Sulphuric Acid))
195
--
cm³/g
ISO 307
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
334000
--
psi
ISO 527-2/1A/1
Tensile Stress (Yield)
7980
--
psi
ISO 527-2/1A/50
Tensile Strain (Yield)
4.0
--
%
ISO 527-2/1A/50
Nominal Tensile Strain at Break
> 50
--
%
ISO 527-2/1A/50
Flexural Modulus 2
254000
--
psi
ISO 178
Flexural Stress 2
9430
--
psi
ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength



ISO 179/1eA
-22°F
1.9
--
ft·lb/in²

73°F
2.6
--
ft·lb/in²

Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
122
--
°F
ISO 75-2/Af
Vicat Softening Temperature
158
--
°F
ISO 306/B50
Melting Temperature 3
383
--
°F
ISO 11357-3
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity 4
1.0E+12
1.0E+10
ohms
IEC 60093
Volume Resistivity 4
1.0E+15
1.0E+13
ohms·cm
IEC 60093
Comparative Tracking Index(Solution A)
600
--
V
IEC 60112
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating (0.031 in)
HB
--

UL 94
Glow Wire Flammability Index (0.08 in)
1200
--
°F
IEC 60695-2-12
Flammability
< 10.0
--
mm/min
FMVSS 302
Injection
Dry
Unit

Drying Temperature - Desiccant Dryer
176
°F

Drying Time - Desiccant Dryer
2.0 to 4.0
hr

Dew Point - Desiccant Dryer
-4
°F

Suggested Max Moisture
0.15
%

Processing (Melt) Temp
464 to 500
°F

Mold Temperature
158 to 176
°F

Injection Rate
Moderate


Extrusion
Dry
Unit

Melt Temperature
464 to 500
°F



Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields


Consultation
展开