Products

Radel® R-5500

Radel® R-5500

Manufacturer: SOLVAY
Produced At: Import/ China
Product Category: Radel PPSU
Product No: Radel R-5500
Product Quantity: 25KG / BAG
Product Features: Acid Resistant，Autoclave Sterilizable，Base Resistant，Biocompatible，Chemical Resistant，E-beam Sterilizable，Ethylene Oxide Sterilizable，Flame Retardant，Good Sterilizability，Good Thermal Stability，Heat Sterilizable，High ESCR (Stress Crack Resist.)，High Heat Resistance，Hydrolytically Stable，Radiation (Gamma) Resistant，Radiation Sterilizable，Radiotranslucent，Steam Resistant，Steam Sterilizable，Ultra High Toughness

Radel® R-5500

Polyphenylsulfone
Product Description:
Radel® R-5500 is a general purpose extrusion grade of polyphenylsulfone (PPSU), offering exceptional hydrolytic stability and better toughness than most commercially available high-temperature polymers. This resin has a high heat deflection temperature, excellent thermal stability, outstanding resistance to environmental stress cracking, good electrical properties and inherent flame retardant properties. Transparent and opaque colors are available.

Transparent Grades:

  • Natural: Radel® R-5500 NT


Opaque Grades:

  • Black: Radel® R-5500 BK937

  • Bone: Radel® R-5500 NT15

  • Grey: Radel® R-5500 GY1137

  • Grey: Radel® R-5500 GY1037

  • Grey: Radel® R-5500 GY874

  • Red: Radel® R-5500 RD1018

  • Orange: Radel® R-5500 OR1145

  • Yellow: Radel® R-5500 YL1337

  • Green: Radel® R-5500 GN1007

  • Blue: Radel® R-5500 BU1027

  • Blue: Radel® R-5500 BU391

  • Violet: Radel® R-5500 VT2582

  • Brown: Radel® R-5500 BN1164

Features 
  • Acid Resistant，Autoclave Sterilizable，Base Resistant，Biocompatible，Chemical Resistant，E-beam Sterilizable，Ethylene Oxide Sterilizable，Flame Retardant，Good Sterilizability，Good Thermal Stability，Heat Sterilizable，High ESCR (Stress Crack Resist.)High Heat Resistance，Hydrolytically Stable，Radiation (Gamma) Resistant，Radiation Sterilizable，Radiotranslucent，Steam Resistant，Steam Sterilizable，Ultra High Toughness
Uses 
  • Aerospace Applications，Aircraft Applications，Dental Applications，Food Service Applications，Hospital Goods，Medical Devices，Medical/Healthcare Applications，Membranes，Surgical Instruments
Agency Ratings 

  • ISO 10993

RoHS Compliance 

  • RoHS Compliant

Appearance 
  • Black，Clear/Transparent，Colors Available
Forms 

  • Pellets

Processing Method 
  • Blow Molding，Extrusion，Film Extrusion，Injection Molding，Machining，Profile Extrusion，Sheet Extrusion，Thermoforming
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
1.29

ASTM D792
Melt Mass-Flow Rate (MFR) (365°C/5.0 kg)
12 to 17
g/10 min
ASTM D1238
Molding Shrinkage - Flow (0.125 in)
7.0E-3
in/in
ASTM D955
Water Absorption


ASTM D570
24 hr
0.37
%

Equilibrium
1.1
%

Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.125 in)
340000
psi
ASTM D638
Tensile Strength (0.125 in)
10100
psi
ASTM D638
Tensile Elongation


ASTM D638
Yield, 0.125 in
7.2
%

Break, 0.125 in
60 to 120
%

Flexural Modulus (0.125 in)
350000
psi
ASTM D790
Flexural Strength (5.0% Strain, 0.125 in)
13200
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in)
13
ft·lb/in
ASTM D256
Tensile Impact Strength (0.125 in)
190
ft·lb/in²
ASTM D1822
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.125 in)
405
°F
ASTM D648
Glass Transition Temperature
428
°F
ASTM E1356
CLTE - Flow (0.125 in)
3.1E-5
in/in/°F
ASTM D696
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
9.0E+15
ohms·cm
ASTM D257
Dielectric Strength


ASTM D149
0.00100 in
> 5000
V/mil

0.125 in
380
V/mil

Dielectric Constant (0.125 in, 60 Hz)
3.44

ASTM D150
Flammability
Nominal Value
Unit
Test Method
Flame Rating 3 (0.030 in)
V-0

UL 94
Optical
Nominal Value

Test Method
Refractive Index
1.672

ASTM D542
Additional Information
Nominal Value
Unit

Steam Sterilization - w/ Morpholine  4
> 1000
Cycles

Injection
Nominal Value
Unit

Drying Temperature
300
°F

Drying Time
2.5
hr

Processing (Melt) Temp
680 to 735
°F

Mold Temperature
280 to 325
°F

Screw Compression Ratio
2.2:1.0


Extrusion
Nominal Value
Unit

Drying Temperature
340
°F

Drying Time
4.0
hr

Cylinder Zone 1 Temp.
640 to 730
°F

Cylinder Zone 2 Temp.
640 to 730
°F

Cylinder Zone 3 Temp.
640 to 730
°F

Cylinder Zone 4 Temp.
640 to 730
°F

Cylinder Zone 5 Temp.
640 to 730
°F

Adapter Temperature
620 to 700
°F

Melt Temperature
650 to 750
°F

Die Temperature
620 to 700
°F


Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields


Consultation

Shanghai Langqi Plastic Materials Co., Ltd.   沪ICP备12022668号 公安机关备案号：31011202003696

展开