Products

Radel® R-5100

Radel® R-5100

Manufacturer: SOLVAY
Produced At: Import/ China
Product Category: Radel PPSU
Product No: Radel R-5100
Product Quantity: 25KG / BAG
Product Features: Acid Resistant，Autoclave Sterilizable，Base Resistant，Biocompatible，Chemical Resistant，E-beam Sterilizable，Ethylene Oxide Sterilizable，Flame Retardant，Good Sterilizability，Good Thermal Stability，Heat Sterilizable，High ESCR (Stress Crack Resist.)，High Heat Resistance，Hydrolytically Stable，Radiation (Gamma) Resistant，Radiation Sterilizable，Radiotranslucent，Steam Resistant，Steam Sterilizable，Ultra High Toughness，General Purpose

Radel® R-5100

Polyphenylsulfone
Product Description:
Radel® R-5100 is an opaque, general purpose polyphenylsulfone (PPSU) for injection molding, that offers exceptional hydrolytic stability, and toughness superior to other commercially-available, high-temperature engineering resins. This resin also offers a high deflection temperature and outstanding resistance to environmental stress cracking. Radel® polymers are inherently flame retardant, provide excellent thermal stability and possess good electrical properties.

  • Black: Radel® R-5100 BK937

  • Bone: Radel® R-5100 NT15

  • Grey: Radel® R-5100 GY1137

  • Grey: Radel® R-5100 GY1037

  • Grey: Radel® R-5100 GY874

  • Red: Radel® R-5100 RD1018

  • Orange: Radel® R-5100 OR1145

  • Yellow: Radel® R-5100 YL1337

  • Green: Radel® R-5100 GN1007

  • Blue: Radel® R-5100 BU1027

  • Violet: Radel® R-5100 VT2582

  • Brown: Radel® R-5100 BN1164

Filler / Reinforcement 

  • Filler

Features 
  • Acid Resistant，Autoclave Sterilizable，Base Resistant，Biocompatible，Chemical Resistant，E-beam Sterilizable，Ethylene Oxide Sterilizable，Flame Retardant，General Purpose，Good Sterilizability，Good Thermal Stability，Heat Sterilizable，High ESCR (Stress Crack Resist.)High Heat Resistance，Hydrolytically Stable，Radiation (Gamma) Resistant，Radiation Sterilizable，Radiotranslucent，Steam Resistant，Steam Sterilizable，Ultra High Toughness
Uses 
  • Aerospace Applications，Aircraft Applications，Connectors，Dental Applications，Food Service Applications，Hospital Goods，Medical Devices，Medical/Healthcare Applications，Plumbing Parts，Surgical Instruments
Agency Ratings 
  • FAA FAR 25.853aISO 10993 3NSF STD-51 4NSF STD-61 5 
RoHS Compliance 

  • RoHS Compliant

Appearance 
  • Black，Colors Available，Light Beige，Opaque 
Forms 

  • Pellets

Processing Method 
  • Blow Molding，Extrusion，Film Extrusion，Injection Molding，Machining，Profile Extrusion，Sheet Extrusion，Thermoforming
Multi-Point Data 

  • Isothermal Stress vs. Strain (ISO 11403-1)

  • Secant Modulus vs. Strain (ISO 11403-1)

  • Viscosity vs. Shear Rate (ISO 11403-2)

Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
1.30

ASTM D792
Melt Mass-Flow Rate (MFR)
14 to 20
g/10 min
ASTM D1238
Molding Shrinkage - Flow
7.0E-3
in/in
ASTM D955
Water Absorption (24 hr)
0.37
%
ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
340000
psi
ASTM D638
Tensile Strength


ASTM D638
Yield
10100
psi

Break
10100
psi

Tensile Elongation


ASTM D638
Yield
7.2
%

Break
60
%

Flexural Modulus
350000
psi
ASTM D790
Flexural Strength (Yield)
13200
psi
ASTM D790
Compressive Modulus
251000
psi
ASTM D695
Compressive Strength
14400
psi
ASTM D695
Shear Strength
9100
psi
ASTM D732
Poisson's Ratio
0.42

ASTM E132
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
13
ft·lb/in
ASTM D256
Unnotched Izod Impact
No Break

ASTM D256
Tensile Impact Strength
190
ft·lb/in²
ASTM D1822
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load


ASTM D648
66 psi, Unannealed
417
°F

264 psi, Unannealed
405
°F

Glass Transition Temperature
428
°F
ASTM E1356
CLTE - Flow
3.1E-5
in/in/°F
ASTM D696
Thermal Conductivity
2.4
Btu·in/hr/ft²/°F
ASTM C177
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
9.0E+15
ohms·cm
ASTM D257
Dielectric Strength
360
V/mil
ASTM D149
Dielectric Constant


ASTM D150
60 Hz
3.44


1 kHz
3.40


Flammability
Nominal Value
Unit
Test Method
Flame Rating 6 (0.030 in, ALL colors, UL file E36098)
V-0

UL 94
Oxygen Index
38
%
ASTM D2863
Optical
Nominal Value

Test Method
Refractive Index
1.672

ASTM D542
Injection
Nominal Value
Unit

Drying Temperature
300
°F

Drying Time
2.5
hr

Suggested Max Moisture
0.050
%

Rear Temperature
610
°F

Middle Temperature
660
°F

Front Temperature
660
°F

Processing (Melt) Temp
650 to 730
°F

Mold Temperature
280 to 325
°F

Back Pressure
50.0 to 100
psi

Screw Compression Ratio
2.2:1.0



Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields


Consultation

Shanghai Langqi Plastic Materials Co., Ltd.   沪ICP备12022668号 公安机关备案号：31011202003696

展开