Elastollan® C60AW
Thermoplastic Polyurethane Elastomer (Polyester)
Product Description:
Elastollan® C60AW is a polyester-based thermoplastic polyurethane (TPU) containing a plasticizer. It exhibits excellent abrasion resistance and toughness, good hydrolytic stability, good heat, oil, fuel and solvent resistance. It has excellent damping characteristics and outstanding resistance to tear propagation. Elastollan® C60AW is supplied uncolored in pellet form.
Appearance | |
Processing Method | ExtrusionInjection Molding |
Density / Specific Gravity | 1.14 |
| ASTM D792 |
Melt Mass-Flow Rate (MFR) (190°C/3.8 kg) | 20 to 60 | g/10 min | ASTM D1238 |
Durometer Hardness (Shore A) | 61 |
| ASTM D2240 |
Tensile Modulus (Injection Molded) | 800 | psi | ASTM D412 |
Flexural Modulus (Injection Molded) | 1300 | psi | ASTM D790 |
Taber Abrasion Resistance | 40.0 | mg | ASTM D1044 |
Abrasion - DIN | 20 | mm³ | DIN 53516 |
Tensile Stress |
|
| ASTM D412 |
100% Strain | 530 | psi |
|
300% Strain | 1300 | psi |
|
Tensile Strength | 3400 | psi | ASTM D412 |
Tensile Elongation (Break) | 760 | % | ASTM D412 |
Tear Strength 2 | 370 | lbf/in | ASTM D624 |
Compression Set |
|
| ASTM D395B |
73°F, 22 hr | 20 | % |
|
158°F, 22 hr | 45 | % |
|
Glass Transition Temperature | -61.6 | °F | Internal Method |
Vicat Softening Temperature | 151 | °F | ASTM D1525 |
Softening Point - DMA | 228 | °F | Internal Method |
Suggested Max Moisture | 0.030 | % |
|
Rear Temperature | 338 to 410 | °F |
|
Middle Temperature | 338 to 410 | °F |
|
Front Temperature | 338 to 410 | °F |
|
Nozzle Temperature | 392 to 410 | °F |
|
Cylinder Zone 1 Temp. | 284 to 347 | °F |
|
Cylinder Zone 3 Temp. | 284 to 347 | °F |
|
Cylinder Zone 5 Temp. | 284 to 347 | °F |
|
Adapter Temperature | 320 to 347 | °F |
|
Die Temperature | 329 to 338 | °F |
|
