Elastollan® 1154D
Thermoplastic Polyurethane Elastomer (Polyether)
Product Description:
Elastollan® 1154D exhibits excellent abrasion resistance, toughness, transparency, very good low temperature flexibility, hydrolytic stability and fungus resistance. It has excellent damping characteristics and outstanding resistance to tear propagation. Elastollan® 1154D conforms to the FDA food contact regulations as described in book 21, section 177.2600 for wet food contact applications. Elastollan® 1154D also has NSF Standard 61 "Water Contact Material" certification. Elastollan® 1154D is supplied uncolored in diced form.
Agency Ratings | FDA 21 CFR 177.2600/NSF STD-61 |
Appearance | |
Processing Method | Extrusion/Injection Molding |
Density / Specific Gravity | 1.16 |
| ASTM D792 |
Durometer Hardness (Shore D) | 54 |
| ASTM D2240 |
Tensile Modulus (0.0866 in, Injection Molded) | 22000 | psi | ASTM D412 |
Flexural Modulus (0.0866 in, Injection Molded) | 24000 | psi | ASTM D790 |
Taber Abrasion Resistance | 60.0 | mg | ASTM D1044 |
Abrasion - DIN | 30 | mm³ | DIN 53516 |
Tensile Stress |
|
| ASTM D412 |
100% Strain, 0.0866 in | 3800 | psi |
|
300% Strain, 0.0866 in | 6600 | psi |
|
Tensile Strength (0.0866 in) | 7000 | psi | ASTM D412 |
Tensile Elongation (Break, 0.0866 in) | 410 | % | ASTM D412 |
Tear Strength 2 (0.0866 in) | 1200 | lbf/in | ASTM D624 |
Compression Set |
|
| ASTM D395B |
73°F, 22 hr | 40 | % |
|
158°F, 22 hr | 50 | % |
|
Glass Transition Temperature | 3.20 | °F | Internal Method |
Vicat Softening Temperature | 280 | °F | ASTM D1525 |
Softening Point - DMA | 261 | °F | Internal Method |
Drying Temperature | 230 to 248 | °F |
|
Drying Time | 2.0 to 3.0 | hr |
|
Suggested Max Moisture | 0.030 | % |
|
Rear Temperature | 410 to 446 | °F |
|
Middle Temperature | 410 to 446 | °F |
|
Front Temperature | 410 to 446 | °F |
|
Nozzle Temperature | 428 to 464 | °F |
|
