Shanghai Langqi Plastic Materials Co., Ltd.

Ultramid® A3ZG6

Manufacturer: BASF
Produced At: Europe / China
Product Category: Polyamide 66 Copolymer
Product No: Ultramid A3ZG6
Product Quantity: 25KG / BAG
Product Features: Good Dimensional Stability、Impact Modified、Oil Resistant

Product information

Ultramid® A3ZG6

Polyamide 66

BASF Corporation

Product Description:

An impact-modified, glassfibre reinforced injection moulding grade with good dimensional stability.

Filler / Reinforcement	Glass Fiber, 30% Filler by Weight
Additive	Impact Modifier
Features	Good Dimensional Stability、Impact Modified、Oil Resistant
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS Compliant
Forms	Pellets
Processing Method	Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density	1.33	--	g/cm³	ISO 1183
Apparent (Bulk) Density	0.70	--	g/cm³
Melt Volume-Flow Rate (MVR)(275°C/5.0 kg)	0.915	--	in³/10min	ISO 1133
Water Absorption				ISO 62
Saturation, 73°F	4.7 to 5.3	--	%
Equilibrium, 73°F, 50% RH	1.3 to 1.7	--	%
Viscosity Number (96% H2SO4 (Sulphuric Acid))	160	--	cm³/g	ISO 307
Mold Shrinkage - constrained 3	0.55	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	1.23E+6	870000	psi	ISO 527-2
Tensile Stress (Break)	20300	14500	psi	ISO 527-2
Tensile Strain (Break)	3.5	6.0	%	ISO 527-2
Tensile Creep Modulus 4 (1000 hr)	--	435000	psi	ISO 899-1
Flexural Modulus	1.06E+6	711000	psi	ISO 178
Flexural Stress	30500	21800	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	4.8	--	ft·lb/in²
73°F	9.0	12	ft·lb/in²
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	40	--	ft·lb/in²
73°F	43	45	ft·lb/in²
Notched Izod Impact Strength				ISO 180/A
-22°F	7.1	8.6	ft·lb/in²
73°F	8.1	9.5	ft·lb/in²

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	482	--	°F	ISO 75-2/B
264 psi, Unannealed	464	--	°F	ISO 75-2/A
Melting Temperature	500	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow : 73 to 176°F	1.4E-5 to 1.9E-5	--	in/in/°F
Transverse : 73 to 176°F	3.3E-5 to 3.9E-5	--	in/in/°F
Specific Heat	0.406	--	Btu/lb/°F
Thermal Conductivity	2.4	--	Btu·in/hr/ft²/°F	DIN 52612
Maximum Service Temperature - short cycle operation	428	--	°F

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	--	1.0E+10	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+12	ohms·cm	IEC 60093
Relative Permittivity (1 MHz)	3.50	5.50		IEC 60250
Dissipation Factor (1 MHz)	0.014	0.16		IEC 60250
Comparative Tracking Index(Solution A)	550	--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification (0.06 in)	HB	--		IEC 60695-11-10, -20

Additional Information	Dry	Conditioned
Polymer Abbreviation	PA66-I GF30	--

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time	4.0	hr
Suggested Max Moisture	0.15	%
Hopper Temperature	176	°F
Rear Temperature	554	°F
Middle Temperature	554	°F
Front Temperature	554	°F
Nozzle Temperature	554	°F
Processing (Melt) Temp	536 to 572	°F
Mold Temperature	176 to 194	°F
Residence Time	< 10.0	min
Screw Speed	< 709	in/min

Products

Products

Ultramid® A3ZG6

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service