Shanghai Langqi Plastic Materials Co., Ltd.

Ultramid® A3EG6 FC

Manufacturer: BASF
Produced At: Europe / China
Product Category: Polyamide 66 Copolymer
Product No: Ultramid A3EG6 FC
Product Quantity: 25KG / BAG
Product Features: Food Contact Acceptable、Oil Resistant

Product information

Ultramid® A3EG6 FC

Polyamide 66

BASF Corporation

Product Description:

The BASF Ultramid® FC (Food Contact) grades enable the industry to develop products for food contact applications which are in compliance with multiple regional food contact regulations including FDA, European Food Contact (EU) Nr. 10/2011 and GMP (EC) n°2023/2006.

Filler / Reinforcement	Glass Fiber, 30% Filler by Weight
Features	Food Contact Acceptable Oil Resistant
Agency Ratings	EC 1907/2006 (REACH) EC 2023/2006 EU 10/2011 FDA Food Contact, Unspecified Rating
RoHS Compliance	RoHS Compliant
Forms	Pellets
Processing Method	Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density	1.36	--	g/cm³	ISO 1183
Apparent (Bulk) Density	0.70	--	g/cm³
Melt Volume-Flow Rate (MVR)(275°C/5.0 kg)	2.44	--	in³/10min	ISO 1133
Water Absorption				ISO 62
Saturation, 73°F	5.2 to 5.8	--	%
Equilibrium, 73°F, 50% RH	1.5 to 1.9	--	%
Viscosity Number (96% H2SO4 (Sulphuric Acid))	145	--	cm³/g	ISO 307
Mold Shrinkage - constrained 3	0.55	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	1.45E+6	1.04E+6	psi	ISO 527-2
Tensile Stress (Break)	27600	18900	psi	ISO 527-2
Tensile Strain (Break)	3.0	5.0	%	ISO 527-2
Tensile Creep Modulus 4 (1000 hr)	--	769000	psi	ISO 899-1
Flexural Modulus	1.25E+6	943000	psi	ISO 178
Flexural Stress	40600	30500	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	5.2	--	ft·lb/in²
73°F	6.2	10	ft·lb/in²
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	33	--	ft·lb/in²
73°F	40	48	ft·lb/in²
Notched Izod Impact Strength(73°F)	5.5	7.4	ft·lb/in²	ISO 180/A

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	482	--	°F	ISO 75-2/B
264 psi, Unannealed	482	--	°F	ISO 75-2/A
Melting Temperature	500	--	°F	ISO 11357-3
Specific Heat	0.359	--	Btu/lb/°F
Thermal Conductivity	2.4	--	Btu·in/hr/ft²/°F	DIN 52612
Maximum Service Temperature - short cycle operation	464	--	°F
Temperature Index - at 50% loss of tensile strength				IEC 60216
-- 5	329	--	°F
-- 6	275	--	°F

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	--	1.0E+10	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+12	ohms·cm	IEC 60093
Relative Permittivity (1 MHz)	3.50	5.60		IEC 60250
Dissipation Factor (1 MHz)	0.014	0.16		IEC 60250
Comparative Tracking Index(Solution A)	550	--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification (0.06 in)	HB	--		IEC 60695-11-10, -20

Additional Information	Dry	Conditioned
Polymer Abbreviation	PA66-GF30	--

Injection	Dry	Unit
Processing (Melt) Temp	536 to 572	°F
Mold Temperature	176 to 194	°F

Products

Products

Ultramid® A3EG6 FC

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service