Products

Ultramid® A3EG10

Ultramid® A3EG10

Manufacturer: BASF
Produced At: Europe / China
Product Category: Polyamide 66 Copolymer
Product No: Ultramid A3EG10
Product Quantity: 25KG / BAG
Product Features: High Stiffness、Oil Resistant

Ultramid® A3EG10

Polyamide 66
Product Description:
A Glass fibre reinforced injection moulding grade for industrial parts requiring high rigidity and providing electrical insulation.
Filler / Reinforcement 

  • Glass Fiber, 50% Filler by Weight

Features 

  • High Rigidity、Oil Resistant 

Uses 

  • Electronic Insulation、Industrial Parts 

Agency Ratings 

  • EC 1907/2006 (REACH)

RoHS Compliance 

  • RoHS Compliant

Forms 

  • Pellets

Processing Method 

  • Injection Molding

Multi-Point Data 

  • Creep Modulus vs. Time (ISO 11403-1)

  • Isochronous Stress vs. Strain (ISO 11403-1)

  • Isothermal Stress vs. Strain (ISO 11403-1)

  • Secant Modulus vs. Strain (ISO 11403-1)

  • Shear Modulus vs. Temperature (ISO 11403-1)

  • Viscosity vs. Shear Rate (ISO 11403-2)

Physical
Dry
Conditioned
Unit
Test Method
Density
1.56
--
g/cm³
ISO 1183
Apparent (Bulk) Density
0.70
--
g/cm³

Melt Volume-Flow Rate (MVR)(275°C/5.0 kg)
0.488
--
in³/10min
ISO 1133
Molding Shrinkage



ISO 294-4
Across Flow
0.82
--
%

Flow
0.33
--
%

Water Absorption



ISO 62
Saturation, 73°F
3.7 to 4.3
--
%

Equilibrium, 73°F, 50% RH
1.0 to 1.4
--
%

Viscosity Number (96% H2SO4 (Sulphuric Acid))
130
--
cm³/g
ISO 307
Mold Shrinkage - constrained  3
0.45
--
%

Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
2.44E+6
1.81E+6
psi
ISO 527-2
Tensile Stress (Break)
34800
26100
psi
ISO 527-2
Tensile Strain (Break)
2.5
3.5
%
ISO 527-2
Tensile Creep Modulus 4 (1000 hr)
--
1.13E+6
psi
ISO 899-1
Flexural Modulus
2.18E+6
1.96E+6
psi
ISO 178
Flexural Stress
52200
43500
psi
ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength



ISO 179/1eA
-22°F
6.2
--
ft·lb/in²

73°F
8.6
12
ft·lb/in²

Charpy Unnotched Impact Strength



ISO 179/1eU
-22°F
43
--
ft·lb/in²

73°F
45
48
ft·lb/in²

Notched Izod Impact Strength(73°F)
6.2
6.9
ft·lb/in²
ISO 180/A
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature




66 psi, Unannealed
500
--
°F
ISO 75-2/B
264 psi, Unannealed
482
--
°F
ISO 75-2/A
Melting Temperature
500
--
°F
ISO 11357-3
CLTE



ISO 11359-2
Flow : 73 to 176°F
2.8E-6 to 1.1E-5
--
in/in/°F

Transverse : 73 to 176°F
2.8E-5 to 3.3E-5
--
in/in/°F

Specific Heat
0.311
--
Btu/lb/°F

Thermal Conductivity
2.6
--
Btu·in/hr/ft²/°F
DIN 52612
Maximum Service Temperature - short cycle operation
464
--
°F

Temperature Index - at 50% loss of tensile strength



IEC 60216
-- 5
329
--
°F

-- 6
275
--
°F

Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
--
1.0E+10
ohms
IEC 60093
Volume Resistivity
1.0E+15
1.0E+12
ohms·cm
IEC 60093
Relative Permittivity (1 MHz)
3.80
6.60

IEC 60250
Dissipation Factor (1 MHz)
0.015
0.17

IEC 60250
Comparative Tracking Index(Solution A)
550
--
V
IEC 60112
Flammability
Dry
Conditioned
Unit
Test Method
Flammability Classification (0.06 in)
HB
--

IEC 60695-11-10, -20
Halogen Content
< 100
--
mg/kg
Internal Method
Additional Information
Dry
Conditioned


Polymer Abbreviation
PA66-GF50
--


Injection
Dry
Unit

Drying Temperature
176
°F

Drying Time
4.0
hr

Suggested Max Moisture
0.15
%

Hopper Temperature
176
°F

Rear Temperature
572
°F

Middle Temperature
572
°F

Front Temperature
572
°F

Nozzle Temperature
572
°F

Processing (Melt) Temp
536 to 590
°F

Mold Temperature
176 to 194
°F


如需巴斯夫原厂物性表及相关文件，请联系我们工作人员，谢谢！

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields


Consultation

Shanghai Langqi Plastic Materials Co., Ltd.   沪ICP备12022668号 公安机关备案号：31011202003696

展开